Premium Color Enhancer & Sealer for Natural Stone & Pavers - Protects Marble, Travertine, Limestone, Granite, Slate | Concrete, Grout, Brick & Block Sealer | Ideal for Patios, Walkways & Countertops

I found the product randomly looking online. For 2 years I have been frustrated with the amount of deposits and fading from our sheer descent water feature on our pool back wall. I tried lime removers, acids, sealers, etc. Nothing worked to achieve what I wanted, which was a return of the stone color. The product reviews were very insightful with good advice. I did not use a brush. I used a new spray bottle with a nice spray head and a new sponge to catch the excess. I bought a gallon, but two coats used only about 40% of it. I let it dry overnight and the next day I added a second coat. Each of the 3 water descents had faded and white colored staining. I did not even try to use anything to brush it off, I just sprayed this product directly on the wall stones and in some places wiped with the sponge. The results are amazing and look even better than these photos show. I was skeptical, but this product really works.I purchased this product when I noticed that after using my conditioner after cleaning, the floor (natural slate) seemed to dull out within a day. In the past, after cleaning/conditioning it would stay bright for weeks. Realizing that I had not sealed my slate floors since I installed them almost 20 years ago, I guess they were due. However, the conditioner does put a form of sealer on the stone - but just not a 'permanent sealer' - as this product is. If you are also using a conditioner and then use this product for a more permanent sealer, please note that unlike the conditioner, which you can walk on as soon as it dries (20 minutes or so), this is a true sealer and took over 24 hours before it was totally dry. It may leave footprints and feel tacky if you walk on it sooner. Considering the cost and not seeing much difference after it was done (see before and after photos) I was happy for that - because I do remember when I originally sealed the floor we could not walk on it for quite some time, and it looked beautiful for years. The 'before' photo was taken after a very thorough cleaning (hand scrubbing the grout, etc), hence, the difference is minimal. Look at the front tiles in the 'after' photo and you should be able to see where I stopped applying the sealer for the day. It is hard to determine from the photos, but it does have a nice slightly 'wet look glow' to it - compared to the unsealed stone. It has been several weeks since I have done this part of the floor and I can say it is retaining its glow very well. I held off from continuing with the rest of the floor only because of some of the reviews that stated that the sealer actually put a haze on the stone (!!) after a week. So I held off to be sure that would not be the case. It has been several weeks and that did not occur. These types of sealers appear to be very sensitive as to what it is applied to the floor (i.e., sealers or other products) before applying this product. I believe that may be why some reviewers may have experienced the haze. I was happy that the product did not react with the conditioner that I use about 4-5 times a year.I used foam brushes to apply the product and that worked very well. The only issue that I had not anticipated is that you must lightly wipe off the residue about 10 minutes after application (I used new microfiber cloths). Since you only have so much working room, I found it difficult when applying since I knew I would need to be able to reach the area 10 minutes later for wiping. That, and you must not let the sealer dry before wiping off the excess made the work flow limiting and took several hours to do this small room (about 6x6). The good news is that although I bought the gallon container based on the coverage, I thought the product went a long way so I'm not worried about running out. Overall, I'm happy that my floors look like new again and I suspect keeping it clean will be easier for quite a few years.I used this product on my outdoor walkway made of "antique black" limestone. From the moment I installed them the stones never really looked black except when they were wet. I loved the black color when the stones were wet so I was looking for a "wet look" sealant before I came across this product. I debated between this "color enhancer" and the "wet look sealant" and in the end I'm happy I went with the enhancer. It brought out the black color of the stones without making them look too shiny/glossy. Very satisfied ! Hopefully the result will hold up over time.Our stone fireplace had a dull, lifeless look. Applied the color enhancer & sealer with a spray bottle and brush. The result is beautiful as evidenced by pictures attached showing halfway and then finished project!!!Ease of use:Prior to this, I’ve never used this product before or anything like it. This was very easy to apply to my new stone wall tiles. I used a low pressure paint sprayer and it went on great. The tiles look amazing on this DIY project. Everyone who has seen it so far makes sure to comment how it looks like a professional did it.Value for the money:My tiles went from looking light and dusty to naturally dark and beautiful. I still have plenty left over to use on other projects. Definitely worth the money!Style:I only applied one coat to my wall which made them look dark and kinda wet which is what I was hoping for. For reference, you can check the picture attached to see the difference between my tiles without the enhancer and the tiles with it.Overall, this stuff is great, however, it does have a strong smell after you apply it which doesn’t last too long. I’ll say it lingered for at least 24 hours in my house before it went away completely. I highly recommend this product for your next stone project!My patio flagstone patio was dull and lifeless after 12 years of sun and wear. I hired someone to mend some of the concrete chips and he got the wrong color and smeared it over some of the stone. I used this to both cover up the big smear but then did the whole patio with 2 gallons. Looks great! Very happy! Please note for the first 2-3 weeks it’s a little shiny and slippery, but it cures in sunlight and looks very natural. This saved me a lot of money!Very easy! I used a sprayer and a roller to smooth it out. I did 2 applications and am very happy with the results. Though it darkened the color there is NO shine to this whatsoever. Just a matter of what you are looking for.very easy to administer we did buy a sprayer and a decent broom . love the effect it has really brought out the colour of the sandstone pavers, and everyone said it looked lovely.I have a 20 year old slate patio and have searched for years for a product i can apply each spring to bring the surface to life...enhanced colour and shine. This product does not do the job. unfortunately. I will be returning it. FYI BEHR Premium Wet Look is working very well. It would be great if you could carry it so I don't have to drive to the paint store. Thank you for the opportunity to provide feedback.I like this product would definitely recommend it.